|
        
| Whatever
your needs - from commercial steel to aluminum full-view doors - Haas Door
delivers it all. |
|
THERMAPRO
|
Haas
Door's ThermaPro™ insulated sectional steel door features a full 3"
pressure-injected core of high-density CFC-free polyurethane foam
insulation, with an R-Value of 24 - the highest in the commercial door
industry. ThermaPro™ is exceptionally strong. For example, in wind-load
tests, a 10-by-8-foot door (without struts) withstood pressures of more
than 45 pounds per square foot, which greatly exceeds both NAGDM and ANSI
specifications for commercial doors. In short, Haas Door's ThermaPro™
is the ideal door for applications that require both maximum energy
efficiency and strength. |
| HAAS-THERM
doors stand up to the elements - insulating, dampening noise, and
enhancing your building's aesthetics at the same time. These insulated
steel doors help increase energy savings with the polyurethane-foam cores.
HAAS-THERM doors are 1-3/4" thick. The R-Value for this product is
14.55. Rigid vinyl extrusions with positive thermal breaks are used to
eliminate metal-to-metal contact, which limits the transfer of
temperature. Tongue-and-groove construction and section joint seals at
meeting rails provide optimum water and wind resistance. |
HAAS-THERM
|
MISER-THERM
|
When your
major considerations include maximum energy efficiency, sound
transmission, and aesthetics, Haas Door's MISER-THERM commercial insulated
steel doors will far exceed your expectations. These CFC-free,
polyurethane-foam-injected steel doors offer exceptional benefits for
commercial applications. These 1-3/8" thick doors have an excellent
R-Value of 12.35. MISER-THERM doors use rigid vinyl extrusions with
positive thermal breaks to eliminate metal-to-metal contact, which limits
temperature transfer. Tongue-and-groove construction and section joint
seals at meeting rails provide water and wind resistance. |
| 20/24/26
Gauge Steel Sectional Doors Models 220/224/224E have a semi-flush panel
configuration that create a pleasing horizontal-line effect. All Models
220/224/224E steel doors are hot-dipped galvanized steel with epoxy prime
coat and top coat of white. Weatherproof section joint. Top and
bottom meeting rails are roll formed to provide a tongue & groove
joint. |
Models 220, 224,
224E
|
| Model 110,
220
|
Model
110: Bottom rails, top
rails and end stiles are 3" on doors up to 13'-11" wide. Doors
greater than 13'-11" wide have 4" bottom rails. All doors wider
than 12'-2" have built in struts on each section.
Model 220:
Bottom rails, top rails and end stiles are 4" on doors
up to 18'-2" wide. Doors greater than 18'-2" wide have 6"
bottom rails and top rails. All doors wider than 12'-2" have built in
struts on each section and doors greater than 18'-2" wide have an
additional "T" shaped cap strut on all sections.
Both Models: Sections
are assembled using .065" minimum aluminum alloy, tubular type
extrusions with through bolt construction. Sections are 1-3/4" thick.
Any Section height is available. All aluminum is clear anodized as
standard. Color anodizing and special paint finishes are optional. Panels
for solid sections are .040" stucco embossed aluminum. A wide variety
of glazing materials are available. |
Click On Any Picture
To See Door Features.
LS
Copyright © 2004 Eastdale Overhead Door Inc. All rights reserved.
Revised: January 17, 2005
.
|
